Be the envy in the pits with the Pro Motion RWB Hoodie. Show support for your favorite tire company by wearing this quality Hoodie. Featuring the Pro Motion "P" offset on the front chest in a red, white, and blue Camo design. The back of the Hoodie features our original Pro Motion logo below the eye popping large "P" logo!

• 100% pre-shrunk cotton

• Premium Fit

• Hooded with Pull Strings

The new J&T Engine mount for Tekno RC vehicles has the best features from all versions of the engine mount rolled up into one package! The V2 version has been beefed up and just looks a lot better. The mount also gives you the option to run the Tekno clutch or most other clutches on the market.

• 3 piece design

• Optional mounting holes to run stock clutch or aftermarket

• Chamfered Edges

• Top hardware included

• Black anodizing with laser etched logo

• Fits the Tekno NB 48 series

The Pro Motion Sidewall Stiffener Insert was developed for when track conditions are no longer "ideal", or high traction surfaces where a more "consistent" feel out of the tires is needed. Through extensive testing the sidewall inserts will help with consistency and stability in a variety of the following condition, High grip, abrasive, rough, and even is lower grip conditions when the track has developed "character". Options for use can be the outside sidewall of all four corners, just the front tires, or just the rear tires. You can fine tune to the current conditions you are facing!

Easy to use, just glue to the sidewall of the tire you would like to use and then glue to the wheel as normal.

The new line of J&T Servo’s are for the serious racer looking for performance and reliability to get wins and compete at the highest levels in RC Racing.

• Suitable for 1/10, 1/8 buggies and Truggies

• Machines Aluminum case and top plate for style and cooling

• Smooth, fast, strong, and highly efficient

• High voltage circuitry

• Full metal gears and dual ball bearings

Specifications:

• Torque:

  • @6.0V: 555.49 oz-in (40 kg-cm)

  • @7.4V: 583.27 (42 kg-cm)

  • @8.2V: 624.93 (45 kg-cm)

• Speed:

  • @6.0V: .12 s

  • @7.4V: 0.11 s

  • @8.2V: 0.09 s

• Weight: 78 g

• Dimension: 40x20x38.5mm

• Working Voltage: 3.5 ~ 8.4 V

• Working frequency: 1520μs / 333Hz

• Dead Band: 0.0008 ms (Default)

• Bearing: 2BB

• Motor: Brushless Motor

• Gear: Steel

The Pro Motion HD 1/8 car stand was designed with the 1/8 scale racer in mind. This stand is strong, tall enough for your buggy or truggy, can be used as a shock stand, and of course it looks great!

• Black anodized with milled chamfered highlights
• Laser etched logo
• Tall enough for buggy and truggy
• Can be used as a shock stand
• Can be disassembled for travel if needed

Be the envy in the pits with the Pro Motion RWB shirt. Show support for your favorite tire company by wearing this quality shirt. Featuring the Pro Motion "P" offset on the front chest in a red, white, and blue Camo design. The back of the shirt features our original Pro Motion logo below the eye popping large "P" logo!

• 100% pre-shrunk cotton

• Slim Fit

• Seamless collar

MOMENTUM SERIES

This reusable water bottle is made from single-wall aluminum. The aluminum carabiner attached to the lid makes carrying easy and can be attached to a belt loop, backpack or almost anything. The size is perfect for workouts, runs, bike rides, outdoor events and more.

• Gloss Black
• Matte Gold Logo
• Re-usable
• Aluminum carabiner 

The J&T Fluid and Accessory bag is ideal keeping fluid bottles upright and safe. Along with shock and diff oil bottles the bag can also be used for most accessories since the dividers in the bad can be removed completely or moved to fit your items with our velcro attachment feature. A mesh pocket on the underside of the lid is a perfect spot to help keep little items organized and in one spot.

• Strong canvas material
• Dual zipper
• Carrying handle
• Adjustable dividers
• Fits "Tall" oil bottles
• Mesh pocket underside lid
• Large J&T logo
• Size 12''L x 8''W x 6''H

The J&T Premium Titanium Clutch Screw is a thing of beauty! Along with the good looks comes a list of features that make this one of the most functional clutch screws on the market!

• Titanium Grade 5 6Al4V certified
• Machined to avoid contact with clutch bearing
• Machined for 5.5mm nut driver or 2.5mm Allen driver
• 3mm low profile head
• 6mm thread length

The new J&T Engine mount for HB Racing vehicles has the best features from all versions of the engine mount rolled up into one package! The V2 version has been beefed up and just looks a lot better.

• 3 piece design

• Correct 7mm block height

• Chamfered Edges

• M5 bottom screws

• All hardware included!

• Black anodizing with laser etched logo

The new J&T Lightweight Flanged Wheel Nuts are a thing of beauty. Machined from 7075 aluminum for strength and designed to add an enhanced look to your 1/8 vehicle. Flanged to add a larger contact patch to your wheels, and serrated for piece of mind. These beauties are available in 9 different colors to match any ride!

The Pro Motion pit mat is here to spruce up your pit space on race day, as well as represent your favorite brand of tires. Approximately 24''x48'' this mat is the perfect size for your work space. Made from durable 4mm thick foam material, this mat is easy to clean, roll up and store away.

• Black foam textures surface
• Pro Motion Logo
• 2ft x 4ft size
• Easy to clean
• Easy to roll up for travel

The Pro Motion carbon fiber pit board is a great way to check your vehicles ride height, droop, and any set up changes that require a perfectly flat surface. Large enough for 1/8 scale (Roughly 20''x16'') and features rounded edges, chamfered top edge, matte finish, and a beautifully engraved Pro Motion logo in the bottom right corner.

• Works for both 1/10 and 1/8 scale
• Fits in your 9800 Ogio bag
• Light weight for travel
• Matte finish
• Chamfered top edge and rounded corner's
• Machined Pro Motion Logo