The J&T Bearing Co. Leading Edge Rear Wing is designed to keep up with today's changing track surfaces and aerodynamic advantages! The single vertical directed side boards allow for advantages on high speed, higher grip tracks. The base of the wing feature multiple levels that transition to a tall rear dam that features dimples for easy hole layout locations. 

Features

• Long life and flexibility

• Vertical tall side dams

• Tall center dividers for a more stable feel

• Dropped base of wing to lower the center of gravity

• Dimples on wing for optional air flow holes

• Grid for hole layout to work with any wing mount

The J&T Titanium lower shock screw set features 2 RHT and 2 LHT screws. These stylish screws are un-like any others currently available with a unique design on the 5.5mm hex head. The LHT screws are marked with 6 dimples around the face of the screw. Along with being lightweight and stylish these screws will also last longer than the stock aluminum versions that wear out, and cause excessive slop in the shock action.

• Titanium Grade 5 6Al4V certified
• Center Dimple for easy droop measurements
• Machined for 5.5mm nut driver
• Unique head design

The J&T Titanium “Milled” XD Turnbuckles feature a 3.5mm Milled center that tapers down seamlessly for a timeless look that will elevate any vehicles appearance! Unlike most “Finned” designed turnbuckles on the market, our turnbuckles are beefed up with a 4mm center as well as manufactured from a higher GR5 titanium that will take a beating. The J&T titanium turnbuckles are also produced with standard right and left hand threads to work with existing stock rod ends. Includes 1/8'' drill bit to drill out standard rod ends.

Looking for a custom color? Contact Walliebuilds at Info@wbfactoryracing.com

• Milled design for timeless looks

• Upgraded 3.5mm XD size

• GR5 Titanium for strength

• Standard threads to fit stock rod ends

• Multiple colors

Be the envy in the pits with the Pro Motion RWB Hoodie. Show support for your favorite tire company by wearing this quality Hoodie. Featuring the Pro Motion "P" offset on the front chest in a red, white, and blue Camo design. The back of the Hoodie features our original Pro Motion logo below the eye popping large "P" logo!

• 100% pre-shrunk cotton

• Premium Fit

• Hooded with Pull Strings

The new J&T Engine mount for Tekno RC vehicles has the best features from all versions of the engine mount rolled up into one package! The V2 version has been beefed up and just looks a lot better. The mount also gives you the option to run the Tekno clutch or most other clutches on the market.

• 3 piece design

• Optional mounting holes to run stock clutch or aftermarket

• Chamfered Edges

• Top hardware included

• Black anodizing with laser etched logo

• Fits the Tekno NB 48 series

The Pro Motion Sidewall Stiffener Insert was developed for when track conditions are no longer "ideal", or high traction surfaces where a more "consistent" feel out of the tires is needed. Through extensive testing the sidewall inserts will help with consistency and stability in a variety of the following condition, High grip, abrasive, rough, and even is lower grip conditions when the track has developed "character". Options for use can be the outside sidewall of all four corners, just the front tires, or just the rear tires. You can fine tune to the current conditions you are facing!

Easy to use, just glue to the sidewall of the tire you would like to use and then glue to the wheel as normal.

The new line of J&T Servo’s are for the serious racer looking for performance and reliability to get wins and compete at the highest levels in RC Racing.

• Suitable for 1/10, 1/8 buggies and Truggies

• Machines Aluminum case and top plate for style and cooling

• Smooth, fast, strong, and highly efficient

• High voltage circuitry

• Full metal gears and dual ball bearings

Specifications:

• Torque:

  • @6.0V: 555.49 oz-in (40 kg-cm)

  • @7.4V: 583.27 (42 kg-cm)

  • @8.2V: 624.93 (45 kg-cm)

• Speed:

  • @6.0V: .12 s

  • @7.4V: 0.11 s

  • @8.2V: 0.09 s

• Weight: 78 g

• Dimension: 40x20x38.5mm

• Working Voltage: 3.5 ~ 8.4 V

• Working frequency: 1520μs / 333Hz

• Dead Band: 0.0008 ms (Default)

• Bearing: 2BB

• Motor: Brushless Motor

• Gear: Steel

The Pro Motion HD 1/8 car stand was designed with the 1/8 scale racer in mind. This stand is strong, tall enough for your buggy or truggy, can be used as a shock stand, and of course it looks great!

• Black anodized with milled chamfered highlights
• Laser etched logo
• Tall enough for buggy and truggy
• Can be used as a shock stand
• Can be disassembled for travel if needed

Be the envy in the pits with the Pro Motion RWB shirt. Show support for your favorite tire company by wearing this quality shirt. Featuring the Pro Motion "P" offset on the front chest in a red, white, and blue Camo design. The back of the shirt features our original Pro Motion logo below the eye popping large "P" logo!

• 100% pre-shrunk cotton

• Slim Fit

• Seamless collar

MOMENTUM SERIES

This reusable water bottle is made from single-wall aluminum. The aluminum carabiner attached to the lid makes carrying easy and can be attached to a belt loop, backpack or almost anything. The size is perfect for workouts, runs, bike rides, outdoor events and more.

• Gloss Black
• Matte Gold Logo
• Re-usable
• Aluminum carabiner 

The J&T Fluid and Accessory bag is ideal keeping fluid bottles upright and safe. Along with shock and diff oil bottles the bag can also be used for most accessories since the dividers in the bad can be removed completely or moved to fit your items with our velcro attachment feature. A mesh pocket on the underside of the lid is a perfect spot to help keep little items organized and in one spot.

• Strong canvas material
• Dual zipper
• Carrying handle
• Adjustable dividers
• Fits "Tall" oil bottles
• Mesh pocket underside lid
• Large J&T logo
• Size 12''L x 8''W x 6''H